SW-100
液體源汽化器
- 準確控制氣液混合物
- 預測試,安全可靠,即插即用
- 高重復性
- 穩定的蒸汽流
液體源汽化器
Bronkhorst? SW-100 VDM 適用于準確的蒸汽流輸送,工作壓力在真空到10 bar之間,可混合最大流量 30 g/h H2O (32 g/h IPA) 和最大流量 4 ln/min載氣。VDM集成了Bronkhorst? CEM系統和其他組件!除了氣體、液體流量控制器和溫控蒸發器,該模塊還具有集成電源和顯示器(1.8″TFT) 和控制功能。此外,可選提供本地或遠程跟蹤加熱溫度控制。
測量控制系統 | |
---|---|
Ambient temperature max | 5?… 40?°C |
Max. heating temperature | 200?°C |
Heater capacity | 10 W |
機械部件 | |
---|---|
Material (wetted parts) | Stainless steel 316L or comparable |
Pressure rating (PN) | 10?bar g |
Process connections | Gas and liquid inlet: compression type or face seal couplings; Vapour outlet: 1/4″ tube (other options on request) |
Seals | Viton?/Kalrez?; other on request |
Purge outlet | 1/8″ OD compression type or 1/8″ face seal male |
Plunger | Kalrez?; other on request |
Display | 1.8″ (TFT technology) |
Mains supply inlet | IEC 60320-1/C20 male socket with on/off switch, 230 V / 115 V; 50 Hz / 60 Hz |
電氣性能 | |
---|---|
Max. power consumption | max. 250 VA; add 300 VA for optional tracing controlVac |
Electrical connection | FLOW-BUS (2 x RJ45 connector) or RS232 (1 x 9-pin sub-D connector); Optional: Pt100-connection (1 x 4-pin M12 male, a-coded); Optional: IEC 60320-2-2/C13 female tracing outlet |
技術參數如有變更,恕不另行通知。
備注:VDM系統配備Bronkhorst熱式或科氏質量流量計/控制器以實現氣體和液體流量控制。
Brochures | |
---|---|
VDM brochure |
Manuals | |
---|---|
Manual Vapor Delivery Module |
Dimensional drawing | |
---|---|
Dimensional Drawing SW100-SW200 |